NECINDO

VT695/VT595/VT590/VT490/VT49

VT695/VT595/VT590/VT490/VT49

High-performance, cost-effective projector offers easy,
multifunction operation perfect for education and business.

• DVI input connector (DVI-I) and HDCP compatible (VT695 and VT595 only)
  With the DVI-I input connector (DVI-I), the projector can display digital RGB images. By using the DVI-RGB adapter, analogue RGB signals can be connected from two computers.

• Quick start & quick cool down.
  Eight seconds after turning on the power, the projector is ready to display PC or video images. Powering down, the fans stop 30 seconds after turning off the power from the remote control or cabinet control panel. The projector can be stored immediately after powering down. The main power for the projector can be turned off by either pressing the main power switch or by unplugging the power cable, even during the cool down period after the projector is turned off.

• Auto Vertical Keystone Correction adjusts the trapezoidal distortion to correct the projected image(VT695 and VT595 only)
  If the position of the screen is too high or low, the projector must be installed at an angle, resulting in trapezoidal distortion of the projected images. The acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the
  projected image automatically to project square images (+/- 30 degrees from the projection angle). Projector setup is quick and easy as manual correction is not necessary. Manual vertical Keystone Correction is available on the VT590/VT490/VT59/VT49.

• Wall Colour Correction for vivid images even without a screen
  Without a screen, projected images are affected because of the colour of the wall or blackboard you are projecting on to. The built-in colour correction for projecting images on a coloured wall or blackboard in this projector means that the colour tones of the projected image is approximate to those that are projected on to a white screen. The following eight colour options are available
  : blackboard, blackboard (gray), light yellow, light green, light blue, sky blue, light rose, and pink.

• Very quiet operation in Eco Mode
  Eco Mode operation drops projector noise to 25 dB for very quiet operation (VT59/VT49) and extends the lamp replacement period up to a maximum of 4000 hours (VT59/VT49). In this mode, total cost of ownership can be effectively reduced. The projector can be put in to Eco Mode very easily with a button on the remote control.

• Auto Start
  Turns the projector on automatically when the power cable is inserted into an active power outlet. This eliminates the need to use the POWER button on the remote control or projector cabinet. *To use Auto Start, first set the main power switch to “On” before plugging in the power cable.

• Remote Mouse Operation
  You can use the supplied wireless remote control and the optional remote mouse receiver to control your PC from across the room. The optional remote mouse receiver (NP01MR) supports almost any PC with a USB connection.

NP40/NP50/NP60

NP40/NP50/NP60

Lightest, Bright, quick and easy setup.

• High brightness of 3000 ANSI lumens in a 1.6 kg lightweight body.
  High brightness of 3000 ANSI lumens (NP60) is more than sufficient for use in a well-lit room.The lightweight magnesium body is compact and extremely strong making it very durable for the travelling professional.

• Auto Focus Function by the focus sensor.
  The focus of the projected image is adjusted automatically by measuring the distance between the focus sensor and the screen. This function activates immediately whenever the power is turned on, the zoom function is adjusted or the position of the main unit is changed, so the projector can be set up easily without focusing every time.

• Auto Input Selection.
  The projector automatically detects the source and projects the image with auto input selection.

• Auto Vertical Keystone Correction adjusts the trapezoidal distortion to cor rect the projected image.
  If the position of the screen is too high or low, the projector must be installed at an angle, resulting in trapezoidal distortion of the projected images. The acceleration sensor built into the main unit senses the inclination of the unit in the vertical direction and then corrects for any trapezoidal distortion in the projected images automatically to project square images. (+/- 16 degrees from the projection angle) The user can set up the projector very quickly and easily since it is not necessary to correct it manually.

• Wall Colour Correction enables vivid images even without a screen.
  Without a screen, the projected images may be affected by the colours of the wall or blackboard. This projector has built-in colour correction for projecting images on a coloured wall or blackboard, so that the colour tones of the projected images can be approximated to those projected on a white screen. The following eight colour options are available as user selections: blackboard, blackboard (gray), light yellow, light green, light blue, sky blue, light rose and pink.

• New Cooling System.
  The NP60/50/40 houses a state of the art new cooling system. This system uses a cooling pump, to pump high pressure / high velocity air around the lamp dramatically improving cooling efficiency. With this new cooling system, the body can be further reduced in size compared with ordinary projectors that use a single cooling fan.
  The NP60/50/40 delivers the same high brightness as the previous LT35/30/25 models, while reducing the weight by 20%.

• Quick Start Up and Cooling Down.
  The projector can project images from a PC or a video within approximately 14 seconds after turning on the power. The length of time it takes for the cooling fan to stop after turning off the main power is just 10 seconds, so the projector can be removed and packed away very quickly after a conference or lecture.

• Quick power-off function.
  The quick power-off function permits immediate removal of the power plug from the electrical outlet after turning off the main power even if the cooling fan is still operating. Since it is not necessary to wait for the cooling fan to stop, the projector can be promptly transferred to another room. With the direct power-off function, it is possible to remove the power plug from an electrical outlet even when images are being projected.

• Security function prevents unauthorized use or theft.
  By using passwords, the projector cannot be used by unauthorized persons. Once the Security function is in effect, a message requesting the password is displayed when the power of the main unit is turned on. It is impossible to project an image unless the proper password is entered.